New pipes in 3 days.
Walls repaired. Water back on.
Failing polybutylene, PEX-B recalls, copper pinholes, or a slab leak? We replace every supply line in your home, patch and repaint every wall we open, and turn your water back on before we leave each night.
Fixed price in writing before we start. Call today and we’ll quote it today.
2–3 daysStart to finish, walls closed
10-yearLabor warranty in writing
4.9 ★2,000+ Google reviews
Since 1989Metro Atlanta homes only
A repipe replaces every hot & cold supply line in your home
Not a patch. Not a section. We swap the entire freshwater system — trunk lines, branch lines, shutoffs, and supply lines to every fixture — with the modern material that fits your home.
Whole-home means whole-home. Kitchen, laundry, every bathroom, hose bibs, and the line to the water heater.
New valves everywhere. Main shutoff, every angle stop, PRV — all replaced, not reused.
Walls put back better than we found them. Drywall repair and computer-matched paint restoration on every wall we open.
2–3 daysTypical whole-home repipe, start to finish
Everything included. In writing.
Every whole-home repipe is a fixed price with these six items already priced in — no surprise line items on day two.
All new supply lines & valves
Trunks, branches, angle stops, main shutoff, and PRV — all replaced, never reused.
Drywall repair & paint match
Every wall we open is patched, textured, and finished with computer-matched paint.
Permits & inspection
Pulled and passed. You get the paperwork for your records and closing packet.
10-year labor warranty
In writing, honored by us — plus the manufacturer’s 25+ year material warranty.
Daily cleanup & water restored
Site cleaned every evening, water back on at the end of each workday.
One company, coordinated in-house repipe specialists
Background-checked employees only. Never a subcontractor swap mid-job.
Atlanta's #1 Repipe Specialists
Since 1989 we’ve made whole-home repiping our specialty, not a side job. Recommended by home inspectors and realtors across Metro Atlanta, with a 10-year labor warranty behind every one.
Compare CPVC, PEX-A, and copper — side by side
Each material has a place. We’ll recommend the right one for your home during the free on-site quote.
FlowGuard Gold CPVC
Chlorine-tolerant, code-approved, and proven in Georgia’s water for decades. Rigid runs stay put in wall cavities and connect with solvent-welded joints — no fittings hiding inside your walls to fail years later.
Uponor PEX-A with expansion fittings
Flexes around obstacles with fewer connections in the wall, and rebounds from a hard freeze that would burst rigid pipe. Expansion fittings actually grow tighter over time — the opposite of the failing PEX-B systems from the 2000s.
Type-L copper
The classic. We still install copper when a homeowner prefers it or a historic property calls for it. Longest track record of any material — with one caveat: some Atlanta water chemistry causes pinhole corrosion in copper over time.
Four steps, no guesswork
From the free on-site quote to the final coat of paint, here is exactly how a whole-home repipe runs.
Free on-site quote
We identify your current pipe material, map the runs, and hand you a fixed written price — no pressure, no upsell.
Pipe day
Furniture covered, wall openings cut with a plaster saw, new supply lines pulled through the whole home. Water restored by evening.
Pressure test & inspection
System pressure-tested at 100 PSI, permit inspector signs off, and every fixture is checked before we move to drywall.
Drywall, texture & paint
Openings patched, textured to match, and computer-matched paint applied. Final walk-through with you before we leave.
The stuff Atlanta homeowners actually ask
How long does a whole-home repipe take?+
Most Metro Atlanta homes are 2–3 days on site. Day 1 is pipe day, Day 2 is pressure test and inspection, and Day 2 or 3 is drywall and paint. Water is restored at the end of every workday.
Do I need to leave the house during a repipe?+
No. You can stay in the home the entire time. We work zone by zone so at least one bathroom stays usable, and full service is restored every evening.
Is the drywall repair really included?+
Yes — patching, texturing, and computer-matched paint on every wall we open. It’s not an add-on. Most Atlanta repipe quotes hide this line item; ours is baked into the fixed price.
What if we’ve already got PEX — do we still need a repipe?+
Not always. Modern PEX-A is a great material. But first-generation PEX-B installed roughly 1996–2007 with brass Kitec fittings has known failure patterns. We can identify which system you have during the free on-site quote.
How much does a whole-home repipe cost in Atlanta?+
Cost depends on home size, foundation type, and pipe material. Every repipe gets a free on-site quote with a fixed written price — no dispatch fee for the quote, and the price we quote is the price you pay.
Do you pull the permit?+
Yes. We pull the permit, schedule the inspection, and hand you the signed paperwork. If you’re selling the home this becomes part of your closing packet.
Do you handle slab leaks and slab repipes?+
Yes. Slab leaks are located with acoustic and pressure equipment, then repaired or bypassed above the slab so we don’t have to jackhammer the floor. This is often the smart move on older copper slab systems.
What’s the warranty?+
10-year labor warranty from Plumbing Express, in writing. Plus the manufacturer material warranty — 25+ years on FlowGuard Gold CPVC and Uponor PEX-A.
What Atlanta homeowners say after their repipe
Let's get it
fixed right.
Free on-site repipe quote, fixed price in writing, and the same crew from day one to the final coat of paint.
Get your free repipe quote
Get your same-day quote
Answer three quick questions about your home. We’ll tell you exactly what you need — a repair, a partial repipe, or a whole-home job — and get your quote moving today.